dead

File manager - Edit - /home/vblioqus/safa777.info/wp-includes/class-wp-image-editor.php

Back
<?php /** * Base WordPress Image Editor * * @package WordPress * @subpackage Image_Editor / /* * Base image editor class from which implementations extend * * @since 3.5.0 / #[AllowDynamicProperties] abstract class WP_Image_Editor { protected $file = null; protected $size = null; protected $mime_type = null; protected $output_mime_type = null; protected $default_mime_type = 'image/jpeg'; protected $quality = false; // Deprecated since 5.8.1. See get_default_quality() below. protected $default_quality = 82; /* * Each instance handles a single file. * * @param string $file Path to the file to load. / public function __construct( $file ) { $this->file = $file; } /* * Checks to see if current environment supports the editor chosen. * Must be overridden in a subclass. * * @since 3.5.0 * * @abstract * * @param array $args * @return bool / public static function test( $args = array() ) { return false; } /* * Checks to see if editor supports the mime-type specified. * Must be overridden in a subclass. * * @since 3.5.0 * * @abstract * * @param string $mime_type * @return bool / public static function supports_mime_type( $mime_type ) { return false; } /* * Loads image from $this->file into editor. * * @since 3.5.0 * * @return true\|WP_Error True if loaded; WP_Error on failure. / abstract public function load(); /* * Saves current image to file. * * @since 3.5.0 * @since 6.0.0 The `$filesize` value was added to the returned array. * * @param string $destfilename Optional. Destination filename. Default null. * @param string $mime_type Optional. The mime-type. Default null. * @return array\|WP_Error { * Array on success or WP_Error if the file failed to save. * * @type string $path Path to the image file. * @type string $file Name of the image file. * @type int $width Image width. * @type int $height Image height. * @type string $mime-type The mime type of the image. * @type int $filesize File size of the image. * } / abstract public function save( $destfilename = null, $mime_type = null ); /* * Resizes current image. * * At minimum, either a height or width must be provided. * If one of the two is set to null, the resize will * maintain aspect ratio according to the provided dimension. * * @since 3.5.0 * * @param int\|null $max_w Image width. * @param int\|null $max_h Image height. * @param bool\|array $crop { * Optional. Image cropping behavior. If false, the image will be scaled (default). * If true, image will be cropped to the specified dimensions using center positions. * If an array, the image will be cropped using the array to specify the crop location: * * @type string $0 The x crop position. Accepts 'left', 'center', or 'right'. * @type string $1 The y crop position. Accepts 'top', 'center', or 'bottom'. * } * @return true\|WP_Error / abstract public function resize( $max_w, $max_h, $crop = false ); /* * Resize multiple images from a single source. * * @since 3.5.0 * * @param array $sizes { * An array of image size arrays. Default sizes are 'small', 'medium', 'large'. * * @type array ...$0 { * @type int $width Image width. * @type int $height Image height. * @type bool\|array $crop Optional. Whether to crop the image. Default false. * } * } * @return array An array of resized images metadata by size. / abstract public function multi_resize( $sizes ); /* * Crops Image. * * @since 3.5.0 * * @param int $src_x The start x position to crop from. * @param int $src_y The start y position to crop from. * @param int $src_w The width to crop. * @param int $src_h The height to crop. * @param int $dst_w Optional. The destination width. * @param int $dst_h Optional. The destination height. * @param bool $src_abs Optional. If the source crop points are absolute. * @return true\|WP_Error / abstract public function crop( $src_x, $src_y, $src_w, $src_h, $dst_w = null, $dst_h = null, $src_abs = false ); /* * Rotates current image counter-clockwise by $angle. * * @since 3.5.0 * * @param float $angle * @return true\|WP_Error / abstract public function rotate( $angle ); /* * Flips current image. * * @since 3.5.0 * * @param bool $horz Flip along Horizontal Axis * @param bool $vert Flip along Vertical Axis * @return true\|WP_Error / abstract public function flip( $horz, $vert ); /* * Streams current image to browser. * * @since 3.5.0 * * @param string $mime_type The mime type of the image. * @return true\|WP_Error True on success, WP_Error object on failure. / abstract public function stream( $mime_type = null ); /* * Gets dimensions of image. * * @since 3.5.0 * * @return int[] { * Dimensions of the image. * * @type int $width The image width. * @type int $height The image height. * } / public function get_size() { return $this->size; } /* * Sets current image size. * * @since 3.5.0 * * @param int $width * @param int $height * @return true / protected function update_size( $width = null, $height = null ) { $this->size = array( 'width' => (int) $width, 'height' => (int) $height, ); return true; } /* * Gets the Image Compression quality on a 1-100% scale. * * @since 4.0.0 * * @return int Compression Quality. Range: [1,100] / public function get_quality() { if ( ! $this->quality ) { $this->set_quality(); } return $this->quality; } /* * Sets Image Compression quality on a 1-100% scale. * * @since 3.5.0 * @since 6.8.0 The `$dims` parameter was added. * * @param int $quality Compression Quality. Range: [1,100] * @param array $dims Optional. Image dimensions array with 'width' and 'height' keys. * @return true\|WP_Error True if set successfully; WP_Error on failure. / public function set_quality( $quality = null, $dims = array() ) { // Use the output mime type if present. If not, fall back to the input/initial mime type. $mime_type = ! empty( $this->output_mime_type ) ? $this->output_mime_type : $this->mime_type; // Get the default quality setting for the mime type. $default_quality = $this->get_default_quality( $mime_type ); if ( null === $quality ) { /* * Filters the default image compression quality setting. * * Applies only during initial editor instantiation, or when set_quality() is run * manually without the `$quality` argument. * * The WP_Image_Editor::set_quality() method has priority over the filter. * * @since 3.5.0 * @since 6.8.0 Added the size parameter. * * @param int $quality Quality level between 1 (low) and 100 (high). * @param string $mime_type Image mime type. * @param array $size { * Dimensions of the image. * * @type int $width The image width. * @type int $height The image height. * } / $quality = apply_filters( 'wp_editor_set_quality', $default_quality, $mime_type, $dims ? $dims : $this->size ); if ( 'image/jpeg' === $mime_type ) { /* * Filters the JPEG compression quality for backward-compatibility. * * Applies only during initial editor instantiation, or when set_quality() is run * manually without the `$quality` argument. * * The WP_Image_Editor::set_quality() method has priority over the filter. * * The filter is evaluated under two contexts: 'image_resize', and 'edit_image', * (when a JPEG image is saved to file). * * @since 2.5.0 * * @param int $quality Quality level between 0 (low) and 100 (high) of the JPEG. * @param string $context Context of the filter. / $quality = apply_filters( 'jpeg_quality', $quality, 'image_resize' ); } if ( $quality < 0 \|\| $quality > 100 ) { $quality = $default_quality; } } // Allow 0, but squash to 1 due to identical images in GD, and for backward compatibility. if ( 0 === $quality ) { $quality = 1; } if ( ( $quality >= 1 ) && ( $quality <= 100 ) ) { $this->quality = $quality; return true; } else { return new WP_Error( 'invalid_image_quality', __( 'Attempted to set image quality outside of the range [1,100].' ) ); } } /* * Returns the default compression quality setting for the mime type. * * @since 5.8.1 * * @param string $mime_type * @return int The default quality setting for the mime type. / protected function get_default_quality( $mime_type ) { switch ( $mime_type ) { case 'image/webp': $quality = 86; break; case 'image/jpeg': default: $quality = $this->default_quality; } return $quality; } /* * Returns preferred mime-type and extension based on provided * file's extension and mime, or current file's extension and mime. * * Will default to $this->default_mime_type if requested is not supported. * * Provides corrected filename only if filename is provided. * * @since 3.5.0 * * @param string $filename * @param string $mime_type * @return array { filename\|null, extension, mime-type } / protected function get_output_format( $filename = null, $mime_type = null ) { $new_ext = null; // By default, assume specified type takes priority. if ( $mime_type ) { $new_ext = $this->get_extension( $mime_type ); } if ( $filename ) { $file_ext = strtolower( pathinfo( $filename, PATHINFO_EXTENSION ) ); $file_mime = $this->get_mime_type( $file_ext ); } else { // If no file specified, grab editor's current extension and mime-type. $file_ext = strtolower( pathinfo( $this->file, PATHINFO_EXTENSION ) ); $file_mime = $this->mime_type; } / * Check to see if specified mime-type is the same as type implied by * file extension. If so, prefer extension from file. / if ( ! $mime_type \|\| ( $file_mime === $mime_type ) ) { $mime_type = $file_mime; $new_ext = $file_ext; } $output_format = wp_get_image_editor_output_format( $filename, $mime_type ); if ( isset( $output_format[ $mime_type ] ) && $this->supports_mime_type( $output_format[ $mime_type ] ) ) { $mime_type = $output_format[ $mime_type ]; $new_ext = $this->get_extension( $mime_type ); } / * Double-check that the mime-type selected is supported by the editor. * If not, choose a default instead. / if ( ! $this->supports_mime_type( $mime_type ) ) { /* * Filters default mime type prior to getting the file extension. * * @see wp_get_mime_types() * * @since 3.5.0 * * @param string $mime_type Mime type string. / $mime_type = apply_filters( 'image_editor_default_mime_type', $this->default_mime_type ); $new_ext = $this->get_extension( $mime_type ); } / * Ensure both $filename and $new_ext are not empty. * $this->get_extension() returns false on error which would effectively remove the extension * from $filename. That shouldn't happen, files without extensions are not supported. / if ( $filename && $new_ext ) { $dir = pathinfo( $filename, PATHINFO_DIRNAME ); $ext = pathinfo( $filename, PATHINFO_EXTENSION ); $filename = trailingslashit( $dir ) . wp_basename( $filename, ".$ext" ) . ".{$new_ext}"; } if ( $mime_type && ( $mime_type !== $this->mime_type ) ) { // The image will be converted when saving. Set the quality for the new mime-type if not already set. if ( $mime_type !== $this->output_mime_type ) { $this->output_mime_type = $mime_type; } $this->set_quality(); } elseif ( ! empty( $this->output_mime_type ) ) { // Reset output_mime_type and quality. $this->output_mime_type = null; $this->set_quality(); } return array( $filename, $new_ext, $mime_type ); } /* * Builds an output filename based on current file, and adding proper suffix * * @since 3.5.0 * @since 6.8.0 Passing an empty string as $suffix will now omit the suffix from the generated filename. * * @param string $suffix * @param string $dest_path * @param string $extension * @return string filename / public function generate_filename( $suffix = null, $dest_path = null, $extension = null ) { // If not empty the $suffix will be appended to the destination filename, just before the extension. if ( $suffix ) { $suffix = '-' . $suffix; } elseif ( '' !== $suffix ) { $suffix = '-' . $this->get_suffix(); } $dir = pathinfo( $this->file, PATHINFO_DIRNAME ); $ext = pathinfo( $this->file, PATHINFO_EXTENSION ); $name = wp_basename( $this->file, ".$ext" ); $new_ext = strtolower( $extension ? $extension : $ext ); if ( ! is_null( $dest_path ) ) { if ( ! wp_is_stream( $dest_path ) ) { $_dest_path = realpath( $dest_path ); if ( $_dest_path ) { $dir = $_dest_path; } } else { $dir = $dest_path; } } return trailingslashit( $dir ) . "{$name}{$suffix}.{$new_ext}"; } /* * Builds and returns proper suffix for file based on height and width. * * @since 3.5.0 * * @return string\|false suffix / public function get_suffix() { if ( ! $this->get_size() ) { return false; } return "{$this->size['width']}x{$this->size['height']}"; } /* * Check if a JPEG image has EXIF Orientation tag and rotate it if needed. * * @since 5.3.0 * * @return bool\|WP_Error True if the image was rotated. False if not rotated (no EXIF data or the image doesn't need to be rotated). * WP_Error if error while rotating. / public function maybe_exif_rotate() { $orientation = null; if ( is_callable( 'exif_read_data' ) && 'image/jpeg' === $this->mime_type ) { $exif_data = @exif_read_data( $this->file ); if ( ! empty( $exif_data['Orientation'] ) ) { $orientation = (int) $exif_data['Orientation']; } } /* * Filters the `$orientation` value to correct it before rotating or to prevent rotating the image. * * @since 5.3.0 * * @param int $orientation EXIF Orientation value as retrieved from the image file. * @param string $file Path to the image file. / $orientation = apply_filters( 'wp_image_maybe_exif_rotate', $orientation, $this->file ); if ( ! $orientation \|\| 1 === $orientation ) { return false; } switch ( $orientation ) { case 2: // Flip horizontally. $result = $this->flip( false, true ); break; case 3: / * Rotate 180 degrees or flip horizontally and vertically. * Flipping seems faster and uses less resources. / $result = $this->flip( true, true ); break; case 4: // Flip vertically. $result = $this->flip( true, false ); break; case 5: // Rotate 90 degrees counter-clockwise and flip vertically. $result = $this->rotate( 90 ); if ( ! is_wp_error( $result ) ) { $result = $this->flip( true, false ); } break; case 6: // Rotate 90 degrees clockwise (270 counter-clockwise). $result = $this->rotate( 270 ); break; case 7: // Rotate 90 degrees counter-clockwise and flip horizontally. $result = $this->rotate( 90 ); if ( ! is_wp_error( $result ) ) { $result = $this->flip( false, true ); } break; case 8: // Rotate 90 degrees counter-clockwise. $result = $this->rotate( 90 ); break; } return $result; } /* * Either calls editor's save function or handles file as a stream. * * @since 3.5.0 * * @param string $filename * @param callable $callback * @param array $arguments * @return bool / protected function make_image( $filename, $callback, $arguments ) { $stream = wp_is_stream( $filename ); if ( $stream ) { ob_start(); } else { // The directory containing the original file may no longer exist when using a replication plugin. wp_mkdir_p( dirname( $filename ) ); } $result = call_user_func_array( $callback, $arguments ); if ( $result && $stream ) { $contents = ob_get_contents(); $fp = fopen( $filename, 'w' ); if ( ! $fp ) { ob_end_clean(); return false; } fwrite( $fp, $contents ); fclose( $fp ); } if ( $stream ) { ob_end_clean(); } return $result; } /* * Returns first matched mime-type from extension, * as mapped from wp_get_mime_types() * * @since 3.5.0 * * @param string $extension * @return string\|false / protected static function get_mime_type( $extension = null ) { if ( ! $extension ) { return false; } $mime_types = wp_get_mime_types(); $extensions = array_keys( $mime_types ); foreach ( $extensions as $_extension ) { if ( preg_match( "/{$extension}/i", $_extension ) ) { return $mime_types[ $_extension ]; } } return false; } /* * Returns first matched extension from Mime-type, * as mapped from wp_get_mime_types() * * @since 3.5.0 * * @param string $mime_type * @return string\|false */ protected static function get_extension( $mime_type = null ) { if ( empty( $mime_type ) ) { return false; } return wp_get_default_extension_for_mime_type( $mime_type ); } }

| ver. 1.4 | Github | . | PHP 8.2.30 | Generation time: 0.31 | proxy | phpinfo | Settings